Preparations For Enabling Active Maintenance - Fujitsu M10-4 Service Manual

Check the hardware RAID volume.
3.
The following example indicates a RAID volume configuration with the
hardware RAID function.
root# ./sas2ircu 0 display
LSI Corporation SAS2 IR Configuration Utility.
Version 19.00.00.00 (2014.03.17)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
(Omitted)
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1 (*1)
(Omitted)
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Enclosure services device
(Omitted)
Device is a Hard disk
(Omitted)
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure#
Logical ID
Numslots
(Omitted)
*1 Displays information on RAID volume 1
*2 Displays enclosure information for HDD/SSD slot #0
*3 Displays information on the physical device mounted in HDD/SSD slot #0
*4 Displays information about the body of the SPARC M10 server
5.4 Preparations for Enabling Active
Maintenance
This section describes the flow of work to be performed in Oracle Solaris on the
control domain in active maintenance. For details on the work and the commands
used, see "3.2 Operations and Commands Related to Logical Domain
Configurations" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain
Configuration Guide and the manual for the application being used.
(*2)
(*3)
(*4)
: 1
: 500000e0:e0450000
: 8
Chapter 5 Preparations Required for Maintenance 69