Removing The Cpu Memory Unit Upper - Fujitsu M10-4 Service Manual

Hold the right and left levers of the CPU memory unit and pull out the CPU
2.
memory unit about 10 cm (3.9 in.)
Figure 9-7 Pulling out the CPU memory unit
With your hands at Handling Position on both sides of the CPU memory unit,
3.
hold and remove the CPU memory unit.
9.5.3

Removing the CPU memory unit upper

Remove the CPU memory unit upper after removing the CPU memory unit from the
chassis. Perform reduction using the same procedure. For installation or for a system
where the CPU memory unit upper is not mounted, remove the filler unit of the CPU
memory unit upper.
1. Unlock (push) the top cover of the CPU memory unit, and remove the cover by
sliding it in the direction of the arrow.
226 Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ June 2023