Fujitsu M10-4 Service Manual page 293

- Connecting the PCIe cable
Note - Of the four PCIe cables, three are already connected to the CPU memory unit lower (C
in Figure 9-68). Just connect these three cables to the CPU memory unit upper. On the left
side as viewed from the rear, also connect the nearest PCIe cable (short) (A in
the two PCIe cables on this side to the CPU memory unit lower. One end of this PCIe cable
(short) has the connector that covers the folded cable (B in
the label). Connect this end to the CPU memory unit upper, and the other end to the CPU
memory unit lower.
Figure 9-68 PCIe cable (short) connection
B
Confirm that all the PCIe cables are firmly connected.
- The PCIe cable locking bracket is facing the memory slots on the CPU memory
unit upper.
- The PCIe cable locking bracket (A in
- After implementation, the PCIe cable connector is vertically connected.
(No depression or protrusion is visible on the side of the joined PCIe cable
connector and CPU memory unit upper connector (B in
Figure
C
A
Figure 9-69) is secured.
Chapter 9 Maintaining the CPU Memory Unit/Memory
Figure 9-68) of
9-68, shown as PCIE0 on
Figure 9-69).)
C
279