Confirming The Fru Information And Resource Information - Fujitsu M10-4 Service Manual

XSCF> ioxadm -v list
Location
State
PCIBOX#2007
On
PCIBOX#2007/PSU#0
On
PCIBOX#2007/PSU#1
On
PCIBOX#2007/IOB
On (*1)
PCIBOX#2007/LINKBD BOARD
On
PCIBOX#2007/FANBP
On
BB#00-PCI#07
On (*2)
*1 Firmware version on the I/O board
*2 Firmware version on the link card
4.1.3 Confirming the FRU information and resource
information
Use XSCF shell commands to check the FRU information and resource information.
Table 4-2
information. For details on each command, see the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 XSCF Reference Manual for the XCP firmware version being used.
Table 4-2 Commands for checking FRU information and resource information
Command
showstatus
showboards
showpcl
showfru
Type FW Ver Serial Num
PCIBOX - PZ21242007
PSU - FEJD1212000530
PSU - FEJD1212000529
IOBOARD 1330 PP123300E5
- PP141900V0
FANBP - PP123203NT
CARD 1330 PP133200UF
lists the commands used for checking the FRU information and resource
Description
Displays the FRU status. Out of the FRUs in the system
configuration, this command displays information on a faulty or
degraded unit or FRU.
Displays information on a physical system board (PSB). Displays
information on a physical system board that belongs to the
specified physical partition and information on all the physical
system boards that are mounted.
Displays the configuration information for a physical partition
(hardware resource information).
Displays the setting information for a device.
Part Num
CA01022-0750-D/
CA01022-0750-D/
CA20365-B66X 008AG
CA20365-B60X 008AD/7061035
CA20365-B68X 004AC
CA20365-B59X 008AD/7061040
Chapter 4 Preparation and Precautions for Maintenance 49