Chapter 10
Maintaining the Internal Disks
This chapter describes the procedure for maintaining the internal disks mounted in
the SPARC M10-4/M10-4S. An internal disk can be replaced, expanded, or reduced.
Before Maintaining an Internal Disk
■
Configuration of the Internal Disks
■
FRU Removal and Installation Flow
■
Removing an Internal Disk
■
Installing an Internal Disk
■
10.1
Before Maintaining an Internal Disk
This chapter only has descriptions of the internal disk configuration and the work of
removing and installing internal disks.
Before removing a FRU, see
necessary work items.
For the types of maintenance on internal disks, also see "Internal disk" in
List of available maintenance types by
10.2
Configuration of the Internal Disks
This section describes the configuration and locations of the internal disks.
The chassis has eight slots for mounting internal disks. The system memory storage
can be expanded by installing extra hard disk drives (HDDs) or solid state drives
(SSDs) in these slots.
"Chapter 7 Maintenance
FRU."
Flow" and perform the
"Table 7-2
293