Upgrades; Upgrade System Software And Firmware - Fujitsu 1FINITY L100 User Manual

System Maintenance

Upgrades

8.4
Upgrades
In this section:
8.4.1

Upgrade System Software and Firmware

8.4.1
Upgrade System Software and Firmware
Prerequisite:
■ The user must be logged on as fujitsu/1finity or have Level-4 or Level-5 privileges assigned to perform this
procedure.
Caution: Fujitsu highly recommends performing a database backup before upgrading system software.
Caution: System only supports upgrades from Release 2.5.2 to Release 19.1.1 and Release 2.6.2 to Release
19.1.1. Direct upgrades from previous releases are not supported.
This procedure describes how to use CLI commands in a CLI window to upgrade system software and FW. The FW
needs to be upgraded if a new FW is part of the load.
Step 1
Transfer a software package to the
Command:
> request transfer ftp action download local-file-path /var/ftp/1FINITY-LSeries-
L100-19011.PGM remote-file-path ftp://anonymous:anonymous@192.168.1.2:21/1FINITY-
LSeries-L100-19011.PGM
Note: From Release 19.1.1 or later, the structure of the PGM filename is changed from 1FINITY-L100-xxxxx.PGM
to 1FINITY-LSeries-L100-xxxxx.PGM.
Step 2
Stage the upgrade.
Command:
> request sw-stage filename 1FINITY-LSeries-L100-19011.PGM
Step 3
Retrieve alarms to verify softwareStageInProgress alarm is raised.
Command:
> show alarms alarm-list
·
Release 19.1.1 Issue 1.1, May 2021
directory of the blade.
/var/ftp
412
Fujitsu and Fujitsu Customer Use Only