Fujitsu M10-4 Service Manual page 261

Figure 9-32 Screws on the CPU memory unit board (for the SPARC M10-4/
M10-4S with a FRAME-B CPU memory unit)
Place your thumbs on the frame, at the center on the right and left sides of the
8.
CPU memory unit board (A in
CPU memory unit board (B in
unit.
Note - Be careful not to touch or catch your clothes or wrist strap on a connector pin located
on the back of the CPU memory unit board.
Note - Hard objects such as a machine tools should not come in contact with the connector
located on the back side of the CPU memory unit board.
Figure 9-33), and insert your fingers under the
Figure 9-34) from the sides of the connector
Chapter 9 Maintaining the CPU Memory Unit/Memory
A
B
247