Power Supply Unit (Psu); Safety Notes; Basic Information - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

6

Power supply unit (PSU)

6.1

Safety notes

CAUTION
▶
Do not disassemble the PSU. Doing so may cause electric shock.
▶
Areas around the PSU may remain extremely hot after shutdown.
After shutting down the server, wait for hot components to cool
down before removing the PSU.
▶
When installing a PSU, ensure that the connector of the PSU is not
damaged or bent.
▶
The PSU is heavy, so handle it carefully. If you drop it by mistake,
injuries may result.
▶
For more information, see
6.2

Basic information

The server can be either equipped with:
– a standard PSU
– up to two hot-plug PSUs
Server equipped with a standard PSU
The PSU adjusts automatically to any mains voltage in the range of 100 V -
240 V.
CAUTION
The server automatically adjusts to a mains voltage in the range from
100 V - 240 V.
▶
You may only operate the server if its rated voltage range
corresponds to the local mains voltage.
RX1330 M5
"Important information" on page
Upgrade and Maintenance Manual
29.
95