Core/Net Module - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

Figure 76
NT4N41 Core/Net shelf fanout panel (backplane)
Core backplane
Group 6 Group 5 Group 4 Group 3
Group 7
j3 j3
j3 j3 j3
slot 11 slot 11 slot 10
slot 12 slot 12
port 1 port 0 port 1
port 1 port 0
j4 j4 j4 j4 j4
slot 12 slot 12 slot 11 slot 11 slot 10
port 1 port 0 port 1 port 0
port 1
NT4N29 cable
j3 slot 9 port 0
Group 0
E
To other
Core/Net
D

Core/Net module

Cabling common equipment in a multi group system
NT4N89 cable
A B
Group 2 Group 1
j3
j3
slot 10 slot 9
port 0 port 1
j4
j4
slot 10 slot 9
port 0 port 1
j4 slot 9 port 0
NT4N29 cable
NT8D99AD cable
NT8D99AD cable
A label kit is included in the system package. Use of these labels is optional.
The Core/Net modules contain two distinct sets of circuit cards: Core cards
and Network cards (see Figure 77 on
instructions on how to configure the Core side of the CP PII Core/Net
modules. To configure the Network side of the Core/Net modules, follow the
instructions in "Cabling network modules and loops" on
Network backplane
E D
page 175). This chapter contains
Large System
Page 173 of 376
System Monitor
(XSM) connections
J3
J2 J1
553-9473
page 203.
Installation and Configuration