Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 166

Page 166 of 376
Connecting the Core/Net backplanes
553-3021-210 Standard 1.00
Cabling common equipment in a single group system
The Shelf 0 and Shelf 1 backplanes must be connected with two NT8D99AD
cables (Core/Net modules only).
Procedure 28
Connecting the Core/Net backplanes
1 Connect one NT8D99AD cable from the "E" port in Core/Net 0 to the "E"
port in Core/Net 1.
2 Connect a second NT8D99AD cable from the "D" port in Core/Net 0 to the
"D" port in Core/Net 1. See Figure 72.
Figure 72
Connecting the Core/Net backplanes
Core backplane
GND
VCC
+ 12
GND
GND
VCC
2 1
E
To other
Core/Net
D
October 2003
End of Procedure
E
NT8D99AD cable
NT8D99AD cable
Network backplane
D
System Montior
(XSM) connections
J3
J2 J1
553-9473