Fiji To Fiji Cabling - Nortel Meridian 1 Succession 1000M Installation And Configuration Manual

FIJI to FIJI cabling

Cabling common equipment in a multi group system
The FIJI cards in Shelf 0 and Shelf 1 of each Network group (except Group
0) must be directly connected with a NTRC47AA FIJI to FIJI Synch Cable
cable.
Procedure 36
Connecting the FIJI to FIJI cables
1 Connect a NTRC47AA cable from J4 to J4 of the FIJI cards in each
Network group, except Group 0 (Figure 89 on
2 Do NOT connect a cable in Group 0. The FIJI to FIJI connection in
Group 0 is made as part of the Clock Controller connections described on
page 198.
Figure 89
FIJI Shelf 0 to FIJI Shelf 1 connections
Group 1, shelf 1
Tx (J1)
Rx (J2)
J3
J4
Group 1, shelf 0
Tx (J1)
Rx (J2)
J3
J4
Group 0, shelf 1
Tx (J1)
Rx (J2)
J3
J4
NTRC47AA cable
End of Procedure
Group 2, shelf 1
Tx (J1)
Rx (J2)
J3
J4
Group 2, shelf 0
Tx (J1)
Rx (J2)
J3
J4
Group 0, shelf 0
Tx (J1)
Rx (J2)
J3
J4
Large System Installation and Configuration
Page 197 of 376
page 197).
Group 3, shelf 1
Tx (J1)
Rx (J2)
J3
J4
Group 3, shelf 0
Tx (J1)
Rx (J2)
J3
J4
553-9113