Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 206

Page 206 of 376
Connecting the Core/Net backplanes
Figure 93
Network Group 0: Shelf 0 to Shelf 1 backplane connections
Core backplane
Group 6 Group 5 Group 4 Group 3
Group 7
j3 j3
j3 j3 j3
slot 11 slot 11 slot 10
slot 12 slot 12
port 1 port 0 port 1
port 1 port 0
j4 j4 j4 j4 j4
slot 12 slot 12 slot 11 slot 11
slot 10
port 1 port 0 port 1 port 0 port 1
NT4N29 cable
j3 slot 9 port 0
Group 0
E
To other
Core/Net
D
553-3021-210 Standard 1.00
Cabling network modules and loops
In Group 0 only, the Shelf 0 and Shelf 1 backplanes must be connected with
two NT8D99AD cables (Core/Net modules only).
Procedure 39
Connecting the Core/Net backplanes
1 Connect one NT8D99AD cable from the "E" port in Core/Net 0 to the "E"
port in Core/Net 1.
2 Connect a second NT8D99AD cable from the "D" port in Core/Net 0 to the
"D" port in Core/Net 1. See Figure 93 on
NT4N89 cable
A B
Group 2 Group 1
j3
j3
slot 10 slot 9
port 0 port 1
j4 j4
slot 10 slot 9
port 0
port 1
j4 slot 9 port 0
NT4N29 cable
NT8D99AD cable
NT8D99AD cable
October 2003
End of Procedure
Network backplane
E D
page 206.
System Monitor
(XSM) connections
J3
J2 J1
553-9473