Nortel Meridian 1 Succession 1000M Installation And Configuration Manual page 273

Powering up the system and initial loading
4 Press the manual RESET button on the CP PII card faceplate.
Before the install runs, the system validates hard disk partitioning which takes
about five minutes. The screen displays:
Testing partition 0
0 percent done...1 percent done......99 percent done....
100 percent done
Testing partition 1
0 percent done...1 percent done......99 percent done....
100 percent done
Testing partition 2
0 percent done...1 percent done......99 percent done....
100 percent completed!
Disk physical checking is completed!
Validate hard drive partition number and size...
There are 3 partitions in disk 0:
The size of partition 0 of disk 0 is XX Mbyte
The size of partition 0 of disk 0 is XX Mbyte
The size of partition 0 of disk 0 is XX Mbyte
Disk partitions and sectors checking is competed!
Large System Installation and Configuration
Page 273 of 376