WATER PUMP REMOVAL/INSTALLATION
MZR-CD (RF Turbo)
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Drain the engine coolant.
4. Remove the timing belt. (See
5. Remove the thermostat. (See
6. Remove in the order indicated in the table.
7. Install in the reverse order of removal.
8. Insect the drive belt. (See
9. Fill the radiator with the specified amount and type of engine coolant.
10. Inspect the engine coolant leakage. (See
38—51
{3.8—5.3, 28—38}
1
38—51
{3.8—5.3, 28—38}
1
Hose
2
Water pump
3
Thermostat case
End Of Sie
WATER PUMP
WATER PUMP
B2–9 TIMING BELT
E–9 THERMOSTAT
B2–4 DRIVE BELT
INSPECTION.)
E–8 ENGINE COOLANT LEAKAGE
1
R
2
7.9—10.7 N·m
{80—110 kgf·cm, 69.5—95.4 in·lbf}
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
19—25
{1.9—2.6, 14—18}
3
R
A6E362015010201
INSPECTION.)
N·m {kgf·m, ft·lbf}
A6E3620W100
E–11
E