Mazda Mazda6 Workshop Manual Supplement page 517

Hide thumbs Also See for Mazda6:

Table of Contents

Transaxle Installation Note

1. Set the transaxle on a jack and lift it.

2. Install the transaxle mounting bolts.

Tightening torque

37—52 N·m {3.8—5.3 kgf·m, 28—38 ft·lbf}

Torque Converter Nuts Removal Note

1. Hold the cankshaft pulley to prevent drive plate

from rotating.

2. Remove the torque converter nuts from the

starter installation hole.

Torque Converter Nuts Installation Note

1. Hold the cankshaft pulley to prevent drive plate

from rotating.

• Loosely and equally tighten the torque

converter nuts, then further tighten them

to the specified tightening torque.

AUTOMATIC TRANSAXLE

Chapters

Table of Contents