Mazda Mazda6 Workshop Manual Supplement page 115

Hide thumbs Also See for Mazda6:

Table of Contents

Plastic Fuel Hose Removal Note

• The quick release connector may be damaged if the tab is bent excessively. Do not expand the tab

over the stopper.

1. Disconnect the quick release connector.

(1) Push the tab on the locking coupler 90

degrees until it stops.

(2) Pull the fuel hose straight back.

• The stopper may be removed from the quick

connector. Take care not to lose it.

Reinstall it to the quick release connector

before reconnecting the fuel line.

• The locking coupler has two internal locking

tabs which retain the fuel pipe. Be sure that

the tab on the locking coupler is rotated until

it stops to release two internal locking tabs.

2. Cover the disconnected quick release connector

and fuel pipe with vinyl sheets or the like to

prevent them from being scratched or

contaminated with foreign material.

Fuel Pump Cap Removal Note

1. Using the SST, remove the fuel pump cap.

49 T042 001A

Chapters

Table of Contents