Manual Transaxle; Transaxle Oil Inspection; Transaxle Oil Replacement - Mazda Mazda6 Workshop Manual Supplement

Hide thumbs Also See for Mazda6:

Owner's manual (446 pages)

User manual (326 pages)

Maintenance schedule (4 pages)

Table of Contents

1. Park the vehicle on level ground.

2. Remove the filler plug and gasket.

3. Verify that the oil is near the brim of the plug port.

• If the oil level is low, add the specified amount

and type of oil through the filler plug hole.

Specified oil grade

API Service GL-4 or GL-5

Specified oil viscosity

4. Install a new gasket and the filler plug.

Tightening torque

30.0—39.0 N·m

{3.06—3.98 kgf·m, 22.1—28.8 in·lbf}

1. Remove the drain plug with the gasket.

2. Drain the oil into a suitable container.

3. Install a new gasket and the drain plug.

Tightening torque

30.0—39.0 N·m

{3.06—3.98 kgf·m, 22.1—28.8 in·lbf}

4. Remove the filler plug with gasket and add the

specified amount and type of oil through the filler

plug hole until the level reaches the bottom of the

filler plug hole.

Specified oil grade

API Service GL-4 or GL-5

Specified oil viscosity

Capacity (approximate quantity)

2.30 L {2.40 US qt, 2.00 lmp qt}

5. Install a new gasket and the filler plug.

Tightening torque

30.0—39.0 N·m

{3.06—3.98 kgf·m, 22.1—28.8 in·lbf}