4. Rotate the flywheel and check for misaligned
diaphragm spring fingers.
• If not as specified, replace the clutch cover.
Misalignment
0.6 mm {0.024 in} max.
End Of Sie
FLYWHEEL INSPECTION (A65M-R MANUAL TRANSAXLE MODELS)
1. Install a dial gauge on the cylinder block.
2. Measure the flywheel runout using a dial
indicator.
• If the runout is excessive, replace the
flywheel.
Runout
0.3 mm {0.012 in} max.
End Of Sie
H–8
CLUTCH UNIT, FLYWHEEL
FLYWHEEL
A6E4920W016
A6E492211500201
A6E4922W001