Table of Contents
Advertisement
SC-F9300 Series
User's Guide
C
Lower the stopper.
c
Important:
Seal the mouth of the bottle with the stopper. If
there is a gap, waste ink may splatter and stain
the surrounding area.
D
Press the Z button.
E
Check again to confirm that a new Waste Ink
Bottle has been installed correctly. Press the Z
button to clear the waste ink counter.
Leave the waste ink in the Waste Ink Bottle for disposal;
do not transfer it to another container.
Note:
Note the following points when transferring waste ink
from the waste ink bottle to another container.
❏ Use a container made of PE (polyethylene) when
transferring the waste ink.
❏ Attach the spout included with the printer to the rim
of the waste ink bottle and transfer the waste ink.
❏ Pour the waste ink carefully. Pouring the waste ink
quickly may cause it to spill and splatter.
❏ Store the waste ink by securely closing the lid of the
container to which you transferred it.
Disposing of used waste ink and Waste Ink Bottle U
"Disposal" on page 80
Maintenance
Replacing the Head
Cleaning Set
Preparing and Replacement
Timing
When Head cleaning set is nearing end of life. is
displayed
Prepare a new head cleaning set as soon as possible.
When you want to replace the parts at this stage due to
night operations and so on, implement Head Cleaning
Set from the setup menu, and then replace the parts. If
you replace them without implementing Head
Cleaning Set, the head cleaning set counter will not
operate correctly.
Maintenance menu U
page 104
c
Important:
About the Head Cleaning Set Counter
The printer tracks amounts consumed using the
head cleaning set counter and displays a message
when the counter reaches the warning level.
If you replace parts when the message " Head
Cleaning Set Life" is displayed, the counter is
cleared automatically.
If you need to replace the parts before the message is
displayed, implement Head Cleaning Set from the
setup menu.
Maintenance menu U
on page 104
When
Head Cleaning Set Life is displayed
See the following page, and replace all the parts included
in the head cleaning set. Printing cannot be performed if
the parts are not replaced.
The head cleaning sets contains the following parts.
❏ Wiper unit (x1)
❏ Flushing pad (x1)
75
"The Maintenance Menu" on
"The Maintenance Menu"
Advertisement
Table of Contents
