Turning On Power - Nortel Multiservice Switch 7400 Installation & Maintenance

Turning on power

Turn on the power source after you have completed all procedures involving
power supplies or cables.
Procedure steps
Step
1
2
Copyright © 2005, Nortel
- 455 -
Hardware procedures
Action
Toggle on the appropriate circuit breaker at the power source that feeds
each power supply that was turned off.
Toggle to the on position the power control on the power supply.
The LED on the power supply of a Nortel Multiservice Switch 7460 device
lights green to indicate power is on. Unlit means the power source is still off.
Nortel Multiservice Switch 7400
Hardware Installation, Maintenance, and Upgrade
NN10600-175 7.1S1 Standard
PCR7.1 and up October 2005
--End--
Nortel Confidential