Nortel Multiservice Switch 7400 Installation & Maintenance page 228

7
8
9
Copyright © 2005, Nortel
- 228 -
Hardware procedures
Hold the faceplate handle in the down position and slide the power supply
the rest of the way in.
The power supply clicks into place when the connectors are firmly seated.
Flip the faceplate handle up so that it is flush with the faceplate.
Use a 1/4-inch flat-head screwdriver to lock the handle into place. Turn the
screw 90° clockwise.
Nortel Multiservice Switch 7400
Hardware Installation, Maintenance, and Upgrade
NN10600-175 7.1S1 Standard
PCR7.1 and up October 2005
--End--
Nortel Confidential