90 Chapter 6 Contivity 4500 option installation
Replacing a power supply
Figure 37
Contivity 4500.
Figure 37 Removing a Contivity 4500 power supply
To remove the power supply:
1
Remove the front bezel as shown in
2
Use a flat-head screwdriver to unscrew the top and bottom power supply
screws.
3
Grab the handle and pull the power supply firmly, until the device disengages.
Avoid the sharp sheet-metal edges.
302283-K Rev 00
shows you how to replace a hot-swappable power supply for the
Figure
32.
CS460010A