Table of Contents
Advertisement
July 1999
IF you wish to
configure a
security
identifier for an
Agent using
channel 6
configure
another
security
identifier
Note: Information configured through the previous steps has not yet been
saved and is currently stored only in RAM. If the board were to be removed
or the power turned off without saving, the information would be lost.
4
If you wish to save the information, type PROVISION SAVE, or P S and
press Enter. See PROVISION SAVE (P S), page 149.
Line Card Configuration Guide
THEN
type the following information:
the channel to which the security identifier is to apply
the agent number to which the security identifier is to
apply
the security identifier of no more than ten digits
Example: 6 3 1234567890
and press Enter.
Result: A message similar to the following appears:
Security ID for Channel 6 Agent
3:0987654321
return to Step 2.
Maintenance
123
Advertisement
Table of Contents
