Nortel HomeOffice II User Manual page 134

Maintenance
4 Configure the HLC's autoclock setting.
See "Autoclock" on page 84 for a description of this setting.
IF you wish to
keep the current
autoclock setting
change the HLC's
autoclock setting
5 Configure the site name for the HLC.
See "Site name" on page 84 for an explanation of this setting.
IF you wish to
keep the current
site name
change the site
name
116
THEN
press Enter and proceed to step 5.
type the new setting (ON or OFF) and press Enter.
Result: The message that appears depends upon
the new setting, according to the following table:
IF you
entered
ON
OFF
THEN type
NO and press Enter (or just press Enter), then go to
step 6.
Result: a prompt similar to the following appears:
Change System Password (YES or NO)
YES and press Enter.
Result: A prompt similar to the following appears:
Enter Site Name [Current Value - NT1]
Type the new site name and press Enter.
Result: A prompt similar to the following appears:
Change System Password (YES or NO)
THEN a message similar
to the following appears
Autoclock is Enabled
Change Site Name (YES or
NO)
Autoclock is Disabled
Change Site Name (YES or
NO)
Meridian HomeOffice II
Standard 01.02