Table of Contents
Advertisement
July 1999
SET ECHO (S E)
This command allows you to individually enable or disable echo canceling for
each HomeOffice II channel.
See "SET ECHO (S E)" on page 120.
SET ONOFFTABLE (S O)
This command establishes the times when users receive access to their channel's
ISDN connection from the HLC.
See "SET ONOFFTABLE (S O)" on page 124.
SET TIME (S T)
This command establishes the time kept on the HLC's clock. This feature may
only be used when Autoclock has been disabled through the SET CONFIG (S
C) command, as discussed on page 84.
See "SET TIME (S T)" on page 134.
SET DATE (S D)
This command establishes the date kept by the HLC.
See "SET DATE (S D)" on page 118.
Capturing the information
Preinstallation planning (see "Planning for the telecommuting needs of the
company" on page 23) recommends recording this information on the following
forms:
Line Card Ports Configuration — Meridian 1
Line Card Ports Configuration — SL-100
You can find each of these forms in the "Deployment Planning" chapter of the
Meridian HomeOffice II Planning Guide (NTP 555-8321-101).
Line Card Configuration Guide
Software configuration
85
Advertisement
Table of Contents
