Nortel HomeOffice II User Manual page 148

Maintenance
IF
you want to
enable indicator
update
you want to
disable indicator
update
Note: Information configured through the previous steps has not yet been
saved and is currently stored only in RAM. If the board were to be removed
or the power turned off without saving, the information would be lost.
4 If you want to save the information, type PROVISION SAVE, or P S and
press Enter. See "PROVISION SAVE (P S)" on page 149.
5 If you want to configure the telephones of other channels, return to Step 2.
130
THEN type
ENABLE and press Enter.
Result: A message similar to the following appears:
Channel 6: corded phone attached
Indicator Update Mode Enabled
Note: Indicator Update Enabled may
increase phone charges.
DISABLE and press Enter.
Result: A message similar to the following appears:
Channel 6: Corded phone attached
Indicator Update Mode Disabled
Standard 01.02
Meridian HomeOffice II