Nortel HomeOffice II User Manual page 133

July 1999
3 Configure the HLC's security level
Note: Refer to the following forms in the Meridian HomeOffice II Planning
Guide (NTP 555-8321-101) for the planned security level:
Line Card Ports Configuration — Meridian 1
Line Card Ports Configuration — SL-100
See "HLC security" on page 11 for a discussion of the properties of the
various Security levels.
IF you wish to
keep the current
security level
change the HLC's
security level
Line Card Configuration Guide
THEN
press Enter.
type a new security level based on the
following table and press Enter:
Level Description
Level 1 No call security
Level 2 Calling party identification
(CPID)
Level 3 Security ID
Result: A message similar to the following appears:
Security Level: 2
Set Autoclock [Current value — OFF]:
Maintenance
115