Nortel HomeOffice II User Manual page 137

July 1999
3 Configure the date kept by the HLC according to the following table.
IF you wish to
keep the date currently
maintained by the HLC
change the date
maintained by the HLC
Result: The HLC displays the information that it receives.
Note 1: Year 2000 is supported. Dates in the year 2000 will have the year
noted as 00.
Note 2: Information configured through the previous steps has not yet been
saved and is currently stored only in RAM. If the board were to be removed
or the power turned off without saving, the information would be lost.
4 If you wish to save the information, type PROVISION SAVE, OR P S and
press Enter. (See "PROVISION SAVE (P S)" on page 149.)
Line Card Configuration Guide
THEN
press Enter.
type the date in MM-DD-YY format and press
Enter.
Result: A message similar to the following
appears:
Current Date 05-27-1999
Maintenance
119