Table of Contents
Advertisement
Software configuration
The T1/E1 DTI connections from your service provider must be
provisioned as two-way DATA trunks only.
The corporate PBX also must be configured with two-way DATA trunks.
The framing, encoding, signaling, and data rate on the PBX and CO must
be equivalent.
The PBX configuration record must have the MODE set as TRK, with
trunk route settings as follows:
ISDN to NO
DSEL to DTA
NDEC/FEDC to EITHER
Note: IBNT2 is an example of a DMS trunk with data capability.
ISDN BRI configuration
Some locations may require ISDN BRI service from the Meridian 1 or SL-100
switch (the host trunk connection) instead of PRI for geographical reasons.
ISDN BRI configuration is identical to ISDN PRI configuration so, if your host
trunk configuration must be BRI, the same configuration elements are needed to
ensure full functionality for all remote sites served. Verify this with your service
provider.
Note: In North America, ISDN BRI can only be ordered as a subscriber line and,
therefore, cannot be used as a trunking option.
64
Standard 01.02
Meridian HomeOffice II
Advertisement
Table of Contents
