Nortel HomeOffice II User Manual page 139

July 1999
IF you wish to
disable echo
canceling for a
channel
configure echo
canceling for
another channel
Note: Information configured through the previous steps has not yet been
saved and is currently stored only in RAM. If the board were to be removed
or the power turned off without saving, the information would be lost.
4 If you wish to save the information, type PROVISION SAVE, or P S and
press Enter. (See "PROVISION SAVE (P S)" on page 149.)
Line Card Configuration Guide
THEN
type
the channel for which echo canceling is being
disabled
OFF
Example: 6 OFF
and press Enter.
Result: A message similar to the following appears:
Echo Cancellation for Channel 6:
Inactive
return to Step 2.
Maintenance
121