Nortel HomeOffice II User Manual page 35

June 1999
Security level and security identifier
There are three security levels for controlling access to corporate ISDN
connections. The default security level (Security Identifier verification, level 3)
requires that you configure a security identifier (up to 10 digits) for a channel
before the HLC allows access to that channel. For help on how to change to a
different security level, see "SET CONFIG (S C)" on page 114.
If you choose not to change the HLC's security level, you must configure
security identifiers for each channel. For help on how to configure a security
identifier, see "SET IDENTIFIER (S I)" on page 122.
Note: You must configure a Security Identifier for each HomeOffice site served
by the HLC if you choose security level 3, the default security level.
For information on how to configure full HLC functionality, see "Optional HLC
configuration" on page 84.
Line Card Configuration Guide
Description
17