Table of Contents
Advertisement
July 1999
7
Enter the UPLOAD (U) command.
IF the HLC
is running
from EPROM
from Flash
memory
Line Card Configuration Guide
THEN
The following message appears:
UPLOAD FLASH? (YES OR NO)
Type Y and press Enter.
A message similar to the following appears:
Uploading using X-MODEM-CRC.
Hit CTRL-X to abort.
CCCCCC
Go to Step 8.
Note: The advancing row of "C"s at the bottom of
the screen serves only to signal that the HLC is
waiting for the filename of the firmware file you
wish to download to Flash memory.
The following message appears:
Firmware is executing from Flash
Reboot to EPROM?
Type N and press Enter to cancel the upload.
Type Y and press Enter to reboot the system to
EPROM.
Result: The following message appears:
Booting EPROM. Please wait...
The HLC is rebooted from E-PROM and Flash
memory is erased.
The MMI session ends and you must log in again
and reenter the UPLOAD command.
Maintenance
163
Advertisement
Table of Contents
