Nortel HomeOffice II User Manual page 151

July 1999
3 Configure the remote number according to the following table.
IF you wish to
configure a remote
number for the
channel
configure a remote
number for an
agent
configure more
remote numbers
Note: Information configured through the above steps has not yet been
saved and is currently stored only in RAM. If the board were to be removed
or the power turned off, the information would be lost.
4 If you wish to save the information, type PROVISION SAVE, or P S and
press Enter. See "PROVISION SAVE (P S)" on page 149.
Line Card Configuration Guide
THEN
type the following information:
the channel number
the ISDN number of the remote site using the
channel
Example: 6 9725551234
and press Enter.
Result: A message similar to the following
appears:
Remote number for channel 6:
9725551234
type the following information:
the channel number
the agent number
the ISDN number of the telephone at this agent's
work station
Example: 6 9 9725551235
and press Enter.
Result: A message similar to the following
appears:
Remote number for channel 6:
9,9725551235
return to Step 2
Maintenance
133