Nortel HomeOffice II User Manual page 96

Software configuration
HLC
channel Voice port
13 13
14 14
15 15
As shown in the preceding table, the first channel configured for a Meridian 1
switch is channel 0. With channel 0, the corresponding voice port is port 0 and
the corresponding data port is port 16.
The first channel on an SL-100 switch is also channel 0 and the corresponding
voice port is port 0; with channel 0 of an SL-100 switch, the corresponding data
port is port 1.
Voice port configuration
On a Meridian 1 switch, configure the voice port as a Meridian 3820 or 2616CT
digital telephone with all the features (such as voice mail, call transfer, and so
on) that are configured on the telecommuter's local site telephone.
On an SL-100 switch, refer to switch documentation for the actual parameter if
you are using a cordless telephone.
Data port configuration
Configure the data port as an MCA data adapter with the first line able to make
and receive data calls. To configure the data port as an MCA adapter, make the
following settings in LD 11:
Meridian 1 software release
15 - 17
18 and above
For further details, refer to the section on LD 11 in the Meridian 1 X11 I/O
Guide (NTP 553-3001-400).
78
Meridian 1
Data port
29
30
31
SL-100
Voice port
26
28
30
Setting
CLS prompt = DTA
DTA0 prompt = MCA
Standard 01.02
Data port
27
29
31
Meridian HomeOffice II