Table of Contents
Advertisement
Description
Extension cables
The HomeOffice II Multi-I/O cable may be unable to reach between the HLC
and the MMI terminal or the SDI port on the switch. Because local site
configuration varies, you may need the MMI extension cable and/or the SDI
extension cable to supply connectivity between these elements of the
HomeOffice II system.
You can purchase the extension cables from your Nortel Networks distributor. If
you prefer to build the cables yourself, this guide provides the pin-out
configuration for each. See "MMI extension cable" on page 47, and "SDI
extension cable" on page 48 for detailed information on these cables.
Daisy chaining
If you require multiple HLCs at the corporate office, you can install them in a
daisy chain to enable maintenance and configuration of all HLCs through a
single maintenance terminal. For a detailed description of daisy chaining
procedures and required daisy chain address DIP switch settings, see
"Understanding the DIP switches" on page 33 and "Installing and cabling
multiple HLCs" on page 53.
14
Draft 01.02
Meridian HomeOffice II
Advertisement
Table of Contents
