Table of Contents
Advertisement
July 1999
5
To exit the switch and return to the HLC MMI, type the host logout
command, @@@.
Result: The MMI command prompt appears on the screen.
Note: The HLC automatically terminates your MMI session after any 15-
minute period of inactivity, but does not log out of the switch. If the HLC
MMI logs out before you log out of the switch's maintenance terminal, you
must do the following to terminate the connection to the switch:
a. Log back in to the HLC MMI.
b. Retype the HOST or HO command and press Enter.
c. Retype the HOST password (HOST) and press Enter.
d. Log out of the switch.
e. Type the HOST logout command, @@@.
Line Card Configuration Guide
Maintenance
95
Advertisement
Table of Contents
