Table of Contents
Advertisement
July 1999
3
Copy the information you wish to duplicate using one of the following two
formats:
IF you want
to copy
one entire
channel's settings
to another channel
one day's settings
to another day
more settings
Note: Information configured through the previous steps has not yet been
saved and is currently stored only in RAM. If the board were to be removed
or the power turned off without saving, the information would be lost.
4
If you wish to save the information, type PROVISION SAVE or P S and
press Enter. See "PROVISION SAVE (P S)" on page 149.
Line Card Configuration Guide
THEN
type
the channel from which the settings are to be
copied
the channel(s) to which the settings are to be
copied (If multiple channels are to receive the
settings, each channel is separated by a comma)
Example: 6 7,8
and press Enter.
Result: A message similar to the following appears:
Channel 6: Copied to Channel 7 8
enter
the channel number
the first three letters of the day from which the
settings are to be copied
the first three letters of each day to which the
settings are to be copied, separated by a comma
Example: 6 Mon Tue,Wed,Thu,Fri
and press Enter.
Result: A message similar to the following appears:
Channel 6 Mon: Copied to Tue Wed Thu Fri
return to Step 2.
Maintenance
97
Advertisement
Table of Contents
