Northern Telecom NAC User Manual page 85

Table 5-1
Fatal error messages
Error Message
Task
Explanation
Error Recovery Procedure
"No list types selected"
display
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"no master node specified"
MAPA Controller
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"no PN data found in sys_list"
MAPA Controller
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"No printers selected"
display
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"no programs in prog_list"
MAPA Controller
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"No raw data base fields in desired statistics group"
display
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then call your Northern Telecom service representative.
"No terminal models selected"
display
There are no records found in the dSP_MODEL table. This table is loaded during system
installation. Check whether any errors occurred during installation. Re-install the hardware and
software if there were errors during the most recent installation/upgrade of the NAC system. If
there were no errors during the installation/upgrade, or if the problem persists after
re-installation, contact your Northern Telecom service representative.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Ulistman.c
ctl_main.c
ctl_main.c
Uprtmenu.c
ctl_master.c
Ufmladef.c
Uterm_setup.c
NAC error messages 5-35