Northern Telecom NAC User Manual page 127

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Couldn't send channel request for node id %hd rc %d"
nccsend
An internal system variable has reached an illegal state.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs then shut down the system and call your Northern Telecom service
representative.
"Cquery aborting"
cquery
A system error has occurred.
Repeat the operation. If the problem still persists, call your Northern Telecom service
representative.
"Cquery file: path name too long [%s]"
cquery
An internal system variable has reached an illegal state.
Repeat the operation. If the problem still persists, call your Northern Telecom service
representative.
"Creating Static Language Segment..."
LangServer
This is an informative message for which no user intervention is required. The task is executing
its recovery procedure.
"Creating User Language Segment..."
LangServer
This is an informative message for which no user intervention required. The task is executing
its recovery procedure.
"crptgen has exceeded its allowable processing time"
sys_rpts
Installation failed or the site has an improper version of the release materials.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
"Customer profile record not found"
display
A database error has occurred.
Verify that the NAC installation had no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Unccsend.c
Ucquery.c
Ucquery.c
lang.c
lang.c
Urpt_proc.c
Upa_misc.c
NAC error messages 5-77