Table of Contents
Advertisement
5-84 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Error closing file for list output."
display
A database error has occurred.
Verify that the NAC installation had no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
"Error closing local tty port"
linkread
A system error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Error closing Remote Login port %s"
display
A system error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Error %d from channel setup to node %s."
cstats
A system error has occurred.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Error %d from rcv_acddata"
cstats
A system error has occurred.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs, then shut down the system and call your Northern Telecom service
representative.
"Error %d reading from tof data pipe"
display
A system error has occurred.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs, then shut down the system and call your Northern Telecom service
representative.
"Error %d reading from SYSDB table spvids"
display
A system error has occurred.
The task should begin its recovery process and will start again without user intervention. If the
problem reoccurs, then shut down the system and call your Northern Telecom service
representative.
553-4011-510 Standard 1.0 November 1994
Module
Upa_dspdef.c
Usetty.c
Uremote.c
Ucstats.c
Ucstats.c
Ucrealtime.c
Ucrealtime.c
Advertisement
Table of Contents
