Table of Contents
Advertisement
5-142 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"The FT request command is longer than maximum (%d)"
ft_server
A system error has occurred.
Repeat the operation. If the problem reoccurs, then shut down and restart the system. Repeat
the operation again. If the problem persists, call your Northern Telecom service representative.
"The given destination [%s] is not a directory"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"The given destination file [%s] is invalid"
ft_server
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"The msg has invalid header"
display
A system error has occurred.
Look for other recent messages and check their meaning. If these indicate other serious
problems then call your Northern Telecom service representative. Otherwise, no action is
required.
"The named output pipe is at its threshold"
ft_server
The named pipe is almost at its operational limit.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"The named output pipe is full"
ft_server
The specified pipe is full.
This message represents a transient condition for which no user intervention is necessary.
553-4011-510 Standard 1.0 November 1994
Module
fxfr.c
fxfr.c
fxfr.c
Usupmsg.c
fxfr.c
ft_server.c
Advertisement
Table of Contents
