Northern Telecom NAC User Manual page 131

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Datagram not responded"
naclink
An internal system variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"DB read failure –– table: nACDNODE"
display
A database error has occurred.
Verify that the NAC installation had no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
"DB read failure –– table: nODELIST"
display
A database error has occurred.
Verify that the NAC installation had no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
"delete failed"
display
An internal database error has occurred while attempting to write a formula definition.
Look for other recent messages and check their meaning. Attempt to write the formula definition
again. If the problem persists, call your Northern Telecom service representative.
"Dest path for APPL does not match in table – %s"
naclink
A database error has occurred.
Verify that the NAC installation has no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
"Dev_in pipe threshold set failed"
linkread
A system error has occurred.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Uopdu_hdl.c
Usupmsg.c
Usupmsg.c
Ufmladef.c
Ucmis_sub.c
Ulinkread.c
NAC error messages 5-81