Northern Telecom NAC User Manual page 115

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Cannot find program %s"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"cannot find program"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"cannot find prog_table entry"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Cannot get node_addr for node_id %d [%d]"
cquery
A database error has occurred.
Verify that the NAC installation had no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
"Cannot lock file %s"
Print_Admin
A system error has occurred while trying to obtain the lock for Lock_File file. Contact your
Northern Telecom service representative for assistance.
"Cannot make model file"
Print_Admin
A system error has occurred while creating the model file for printer. Contact your Northern
Telecom service representative for assistance.
"Cannot match string from max system state file"
libcommon
A database error has occurred.
Verify that the NAC installation had no errors. If so, then call your Northern Telecom service
representative. Otherwise, reinstall the NAC software. Call your Northern Telecom service
representative if the problem persists.
"Cannot obtain lock"
Print_Admin
A database error has occurred. Re-install the hardware and software if there were errors during
the most recent installation/upgrade of the NAC system. If there were no errors during the
installation/upgrade or the problem persists after re-installation, call your Northern Telecom
representative.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
ctl_main.c
ctl_master.c
ctl_utils.c
Ucquery.c
Ulp_setup.c
Ulp_setup.c
Umax_mode.c
Ulp_setup.c
NAC error messages 5-65