Table of Contents
Advertisement
Maintenance and administration programs: system running 3-13
Node Name
Specifies the descriptive name assigned to the node.
Short Name
Specifies the abbreviated name for the node.
Time Zone
Specifies the difference between the time at the nodal site and the NAC
site. The value must be between –12.0 and +12.0 in 0.5 hour units. For
example, if the NAC site is in New York, and the nodal site is in Los
Angeles, -3.0 appears as the time zone because there are three hours
difference between Eastern Time and Pacific Time. If the NAC site is in
Los Angeles and the nodal site is in New York, the entry is 3.0.
Connection Baud
Specifies the baud rate for the network link connection.
Connection Port
Specifies the network link of the NAC to node connection.
Remote Login Port
Specifies the port identifier used for a direct remote login connection to the
MAX node.
Remote Directory Number
Specifies the number to be dialed when connecting the remote login
modem to the appropriate node (the NAC handles the dialing
automatically). The commas in the directory number cause the dialing to
pause momentarily. For example, it can be used when dialing a prefix to
access an external line.
Ntwk Link
Indicates the state of the communication link between the node and the
NAC.
If this field is set to disabled, the node does not provide information to the
NAC, supervisor messages are not transmitted to or from the node, remote
printing cannot occur between the node and the NAC, and remote
supervisor logins to the node are prohibited.
Network Administration Center System Administration and Maintenance Guide Product release 2
Advertisement
Table of Contents
