Northern Telecom NAC User Manual page 216

5-166 NAC error messages
Table 5-3
Informational error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Created the named pipe [%s]"
ft_server
The named pipe is created.
Informative; no user intervention is necessary.
"Datagram error –"
naclink
Datagram error received.
The task should restart the process by itself. If the problem still persists, call your Northern
Telecom service representative.
"Frame checksum failed"
linkread
The checksum in frame level is not connected.
The task should restart the process by itself. If the problem still persists, call your Northern
Telecom service representative.
"FT #%05ld (file #%d) to node %d: status = %d; error = %d params [%s]"
ft_server
This message provides file transfer status information.
If other warning messages which indicate report related problems appear, report this message
together with those other messages to your Northern Telecom service representative.
"Invalid frame sequence"
linkread
A frame sequence is not sent correctly.
Informative; no user intervention is necessary.
"Link restarted from remote"
linkread
The Linkreader is restarted by the remote side.
Informative; no user intervention is necessary.
"Maxi ft sessions exceeds 50"
ft_server
The ft sessions have reached the max limit.
Informative; no user intervention is necessary.
"Message is not sent to host"
linkread
A message is not sent to the host side.
Informative; no user intervention is necessary.
553-4011-510 Standard 1.0 November 1994
Module
fxfr.c
Uapp_error.c
Umprotocol.c
fxfr.c
Umprotocol.c
Umprotocol.c
ft_server.c
Umprotocol.c