Northern Telecom NAC User Manual page 209

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Unexpected nquery msg %c from node_addr %d with status %d"
cquery
An unexpected message was received.
Current operations may be affected. Retry if necessary. Call your Northern Telecom service
representative if the problem persists.
"Unit name %s too long"
cquery
Installation failed or the system has an improper version of the release materials.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
"Unit name "%s" too long [%d]"
sys_rpts
A system variable has reached an illegal state.
The system should begin its recovery process and will start again without user intervention. If
the problem reoccurs, then shut down the system and call your Northern Telecom service
representative.
"unknown application message"
nccrcv
An unexpected message was received.
Current operations may be affected. Retry if necessary. Call your Northern Telecom service
representative if the problem persists.
"unknown calculation component"
display
An internal variable has reached an illegal state.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative.
"unknown change type"
nccrcv
An internal variable has reached an illegal state.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative.
"Unknown DN [%d]"
display
The specified node is unknown.
Ignore this message if this is an isolated incident. Otherwise, call your Northern Telecom service
representative.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
Ucquery.c
Ucquery.c
Urpt_utils.c
Unccrcv.c
Uflmadef.c
Utcup.c
Usupmsg.c
NAC error messages 5-159