Northern Telecom NAC User Manual page 126

5-76 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Could not extract data from any node"
cquery
A file transfer problem has occurred.
Retry the operation that generated this error. Call your Northern Telecom service representative
if the problem persists.
"could not find locked DB"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"could not find program"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"could not find queued DB"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"could not find queued program"
MAPA Controller
A variable has reached an illegal state.
Ignore this message if this is an isolated incident. Otherwise, shut down and restart the system.
"Could not find unallocated display table slot"
mpsa
A system database error has occurred when adding a new supervisor workstation to the System
Database. Repeat the operation. If the problem persists, contact your Northern Telecom service
representative.
"Could not find unallocated printer table slot."
mpsa
A system error occurred while trying to add a printer record to System Database. Contact your
Northern Telecom service representative.
"Could not open NCC response pipe %s"
nccsend
A file cannot be found.
Look for other recent messages relevant to this message. If the messages found are serious,
shut down and restart the system. This task should be recovered by itself. If the problem
persists, then call your Northern Telecom service representative. Otherwise, ignore this
message.
553-4011-510 Standard 1.0 November 1994
Module
Ucquery.c
ctl_master.c
ctl_master.c
ctl_master.c
ctl_master.c
Udsp_info.c
Uprt_info.c
Unccsend.c