Table of Contents
Advertisement
5-130 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Referenced record could not be deleted –– table: rpt_defn"
display
A database error has occurred.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
"Remove printer failed rc = %d"
hw_detect
A system error occurred. The printer could not be removed. Try running hw_detect again and
if the problem persists contact your Northern Telecom service representative.
"report generation failed"
sys_rpts
A system problem has occurred.
Look for other recent messages and check their meaning. If these indicate other serious
problems then call your Northern Telecom service representative. Otherwise, no action is
required.
"request for graph failed"
display
A system variable has reached an illegal state.
Look for other recent messages and check their meaning. If these indicate other serious
problems then call your Northern Telecom service representative. Otherwise, no action is
required.
"request for report failed"
display
A system error has occurred.
Look for other recent messages and check their meaning. If these indicate other serious
problems then call your Northern Telecom service representative. Otherwise, no action is
required.
"request for system report failed"
display
Installation failed or the site has an improper version of the release materials.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
553-4011-510 Standard 1.0 November 1994
Module
rptdef.c
Uhw_detect.c
Urpt_proc.c
mapaif.c
mapaif.c
mapaif.c
Advertisement
Table of Contents
