Table of Contents
Advertisement
5-146 NAC error messages
Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Transfer of file '%s' to grgen node failed"
display
A system error has occurred.
Look for other recent messages and check their meaning. If these indicate other serious
problems then call your Northern Telecom service representative. Otherwise, no action is
required.
"Transfer of file '%s' to sys_rpts node failed"
display
A system error has occurred.
Look for other recent messages and check their meaning. If these indicate other serious
problems then call your Northern Telecom service representative. Otherwise, no action is
required.
"ULANGDB Shared Memory Segment Corrupted –– Rebuild Segment"
LangServer
A region of shared memory has been corrupted. Shut down and restart the NAC system. This
should result in a full recovery of the affected memory.
"unable to access data database"
sys_rpts
The system has problems with the database lock.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
"Unable to access dSP_COLS"
display
A database error has occurred.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
"Unable to acckey nODELIST"
display
A database error has occurred.
Check your release materials (that is, version number and system type). If they appear to be
correct, reinstall the NAC release. If the error message returns, call your Northern Telecom
service representative.
553-4011-510 Standard 1.0 November 1994
Module
mapaif.c
mapaif.c
lang.c
Urpt_proc.c
Upa_dspdef.c
Usupmsg.c
Advertisement
Table of Contents
