Northern Telecom NAC User Manual page 155

Table 5-2
Warning error messages
Error Message
Task
Explanation
Error Recovery Procedure
"Invalid descriptor %d used"
ft_server
A system error has occurred.
Repeat the operation. If the problem reoccurs, then shut down and restart the system. Repeat
the operation. If the problem still persists, call your Northern Telecom service representative.
"Invalid descriptor %d used"
ft_server
A system error has occurred.
Look for other recent messages relevant to this messages. If the messages found are serious,
shut down the system and call your Northern Telecom service representative. Otherwise, ignore
this message.
"Invalid display status = %d"
mpsa
An internal variable has reached an illegal state. Contact your Northern Telecom service
representative.
"Invalid file type found in CC log file"
display
An internal variable has reached an illegal state.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
"Invalid file type found in preview file"
display
An internal variable has reached an illegal state.
Ignore this message if this is an isolated incident. Call your Northern Telecom service
representative if the problem persists.
"invalid FLAG passed: %s"
libcommon
An internal variable has reached an illegal state.
Call your Northern Telecom service representative.
"Invalid foreground color specification"
lib_usrif
There is a problem in the Video Attributes file for this device. A foreground color has been
specified which is invalid. The user interface will continue reading the file. If you experience
problems, specify a different terminal type. This should be reported to your Northern Telecom
service representative.
Network Administration Center System Administration and Maintenance Guide Product release 2
Module
ft_server.c
fxfr.c
Udsp_info.c
Upreview.c
Upreview.c
Uatt_shm.c
pscreen.c
NAC error messages 5-105